+1 (909) 375-5650
4982 Parkway Street, Los Angeles, CA 90017
Get an Answer

Advanced Network Design Assessment

Advanced Network Design Assessment

 Assessment Details and Submission Guidelines

Unit Code BN321
Unit Title Advanced Network Design
Assessment Type Individual written report and group demonstration–T2 2017 (Assignment 2)
Assessment Title Advanced Network Design and Setup
Purpose of the assessment (with ULO Mapping) Main objectives of this assignment is to enable student toplan a network design, setup WAN appropriately using physical networking devices and implement appropriate to business requirements. After successful completion of this assignment, students should be able to:

a. Analyse the need for WAN networks, standards and network solutions
b. Ability to analyse network design requirements.
c. Ability to plan, design and implement networks appropriate to business requirements.
Weight 15% of the total assessments
Total Marks 50
Word limit 2000
Due Date Week 11, demonstrate during laboratory class and submit report on Moodle
Submission Guidelines • All work must be submitted on Moodle by the due date along with a completed Assignment Cover Page.

• The assignment must be in MS Word format, 1.5 spacing, 11-pt Calibri (Body) font and 2 cm margins on all four sides of your page with appropriate section headings.
• Reference sources must be cited in the text of the report, and listed appropriately at the end in a reference list using IEEE referencing style.
Extension • If an extension of time to submit work is required, a Special Consideration Application must be submitted directly to the School’s Administration Officer, on academic reception level. You must submit this application within three working days of the assessment due date.

Academic Misconduct

• Academic Misconduct is a serious offence. Depending on the seriousness of the case, penalties can vary from a written warning or zero marks to exclusion from the course or rescinding the degree.

Client’s Requirements

The school required the conversion of an existing classroom into an ICT classroom. The school required the successful tenderer to provide a complete project management solution which was to include the delivery of the ICT Network, data cabling, electrics, furniture, security and audio visual facilities.

Detailed school structure:
1. Each ICT classroom can accommodate 24 students and one instructor, total of 25 people.
2. Design 5 ICT classroom with 25 PCs, one whiteboard, one projector / Display monitor in the center of a wall.
3. Phone are located in each ICT room to communicate to service desk.
4. Two campuses are located in different cities.

Write a report on a network plan and configurations.
1. Draw a complete network design for an above scenario. (Include block diagram for each ICT room)
2. Detailed setup of one ICT room.
3. Write configurations of each networking device which are included in the whole network including WAN.
4. Configure switches, routers and PCs on physical networking devices and demonstrate the working model.

Demonstration: Students can demonstrate in a group of 2. Students should be ready with all setup and configurations before start of the laboratory class. Tutor will ask 2-3 questions to each student to demonstrate any configuration of the setup. Demonstration from each student should not be more than 3 minutes.

Students should give their group members to tutor in week 10 during lab class. Students will get demonstration timetable before start of the week 11 lab class.

In your report include the following contents

• Project Scope
• Network diagrams (including WAN)
• Project hardware requirements
– Name of the network device with manufacturer’s name, series, model and ports
• Network device configurations
– Include most of the suitable feature which you have studied from laboratories 7 to 10.


Marking criteria:

Section to be included in the report Description of the section Marks
Project scope Outline of the report ( in 3-4 sentences) 2
Project hardware requirements
– Name of the network device with manufacturer’s name, series, model and ports
Network Design
Write justification of the WAN network design 8
Network device configurations Configuration commands to configure network
– WAN protocols
– LAN protocols
– VOIP protocols 10
Network device configurations –Demonstration on physical device Demonstration of various features (4 marks each protocol demonstration)
– VOIP 24
Reference style Follow IEEE reference style 2
Total 50


Marking Rubrics

Grades Excellent Very Good Good Satisfactory Unsatisfactory
Project scope Concise and specific to the project Topics are relevant and soundly analysed. Generally relevant and analysed. Some relevance and briefly presented. This is not relevant to the assignment topic.
Project hardware requirements

Demonstrated excellent ability to think critically and sourced reference material appropriately Demonstrated excellent ability to think critically but did not source reference material appropriately Demonstrated ability to think critically and sourced reference material appropriately Demonstrated ability to think critically and did not source reference material appropriately Did not demonstrate ability to think critically and did not source reference material appropriately
Network Design

Network device configurations All elements are present and very well integrated. Components present with good cohesive Components present and mostly well integrated Most components present Proposal lacks structure.

IEEE Reference style Clear styles with excellent source of references. Clear referencing style Generally good referencing style Sometimes clear referencing style Lacks consistency with many errors

Do you want your assignment written by the best essay experts? Then look no further.  Order Now, and enjoy an amazing discount!!




Previous ArticleNext Article